Cost Reduction Audits

DHP only provides training and technical services. We don’t sell equipment. We don’t sell chemicals. Since 1988 we have provided unbiased consulting services to hundreds of plants. We have reduced the cost of water treatment at these plants. We know how to reduce costs. We GUARANTEE that we can evaluate your water treatment plant and save you more money within one year, than the cost of an audit. This offer is too good to pass up. We can save you more money in the next 12 months than the cost of the audit. That affects your bottom line this year! This is a return on investment is less than 12 months! For more information click [HERE].

In today’s world, reducing the cost of water treatment is a MUST! Knowing all the areas in a water treatment plant to evaluate to cut cost to the minimum takes knowledge and experience. DHP has been doing this since 1988.

How a Cost Reduction Audit Works

The following simple procedure is all that it takes to start saving money right away:

1. You contact us by clicking here to discuss a Cost Reduction Audit.
2. If you decide to proceed, you fill out a Cost Reduction Audit Questionnaire.
3. A telephone meeting is set up.
4. If the decision is made to proceed, a DHP Cost Reduction Audit is purchased.
5. DHP completes the Cost Reduction Audit and issues a Final Report.
6. You and DHP agree what the first year savings will be following implementation of the recommendations

The Guarantee

If the result of DHP performing a Cost Reduction Audit of your water treatment system doesn’t result in mutually-agreed-upon savings in excess of the audit price within 12 months following implementation of the recommendations, the price of the audit is reduced to the actual amount saved!

How DHP Can Make This Offer

DHP instructors/consultants have been performing audits of water treatment systems since 1988. To date, DHP has ALWAYS produced more savings than the price of the audit. As you’ll see in the examples below, the savings can be from tens of thousands to hundreds of thousands of dollars per year. DHP has audited hundreds of water treatment systems. DHP knows how and where to find water treatment cost reduction.

Some of the Areas DHP Analyzes for Cost Reduction

• Chemical usage
• System design
• System operation
• System maintenance
• Chemical cleanings and sanitizations
• Instrumentation
• Water analysis
• Monitoring & control
• More

Examples

Power Generation

DHP has performed audits in many power generation plants. An example was a plant that had extreme pretreatment problems and reverse osmosis (RO) unit biofouling. The RO units would only operate a few hours after cleaning prior to requiring cleaning again. The plant was in the process of purchasing new membrane elements after receiving less than a year of service from existing elements. The results of a DHP Cost Reduction Audit resulted in many cost savings, including extending the life of the existing elements, with a first year savings exceeding $500,000.

Low Pressure Boiler Feed Water

DHP has performed audits in many boiler feed water plants. An example was a plant that, among other problems, was greatly overdosing chemicals given the existing feed water and operation. A DHP Cost Reduction Audit resulted in first year savings of more than $50,000.

Drinking Water

DHP has performed audits in many drinking water facilities, including fresh water, brackish water and seawater plants. An example was a plant that had to chemically clean RO units too frequently. A DHP Cost Reduction Audit unveiled other costly operational issues. The result was a first year saving of over $80,000.

Pharmaceutical/Biotech

DHP has performed audits in many pharmaceutical/biotech plants. An example was a plant where RO membrane elements required too frequent cleaning and element life was less than 1.5 years. A DHP Cost Reduction Audit identified several costly feed water, pretreatment and RO operational issues. The first year savings were in excess of $150,000.

Beverage

DHP has performed audits in a few beverage plants. An example was that one product line was shut down due to biological contamination of the water treatment system. A DHP Cost Reduction Audit resulted in identifying the problem and the product line became operational within a few days. First year savings were greater than $30,000.

Microelectronics

DHP has performed audits in several microelectronics plants. An example was a plant that had unexplained RO unit performance degradation issues. A DHP Cost Reduction Audit uncovered several design, operational and pretreatment issues. First year savings were over $55,000.

Governmental Agencies

DHP has performed audits for several government-owned/military systems. An example was military RO units requiring too frequent membrane element replacement. The result of a DHP Cost Reduction Audit was doubling the run times of RO elements. First year cost savings were estimated to be in the hundreds of thousands of dollars as a minimum.

Other

DHP has performed audits in many other industrial plants. An example was a car windshield manufacturing plant that had to replace RO membrane elements and cartridge prefilters too frequently. A DHP Cost Reduction Audit resulted in identifying several operational, maintenance and instrumentation problems. First year savings were more than $60,000.

Benefits of DHP’s Cost Reduction Audits

• YOU SAVE MONEY…Guaranteed!